Sobre nosotros| En contacto con nosotros
EnglishDeutschРусскийEspañol
» Control System » Marine Control System » XMS91 Series Marine Anchor Windlass Control Box

Caja de control de molinete de ancla marina serie XMS91

Voltaje: AC380/400/415/440/480/660V

Frecuencia: 50Hz / 60Hz

Protection level: IP22/IP23/IP44/IP56

Ambient temperature: -25℃ ~45℃

  • Descripción
  • Main Parameter
  • Working conditions
  • Structure

La caja de control del molinete de ancla marina de la serie XMS91 es adecuada para el arranque, frenado, Girar o retroceder, y cambio de control de velocidad de varios tipos de anclaje eléctrico de barcos y motores de CA de cabrestante de cable. La caja de control del molinete de anclaje marino de la serie XMS91 es adecuada para AC 50H trifásica en, 60Hz, 380V, 400V, 415V, 440V, 480V, y 660V. Se utiliza para controlar el motor asíncrono trifásico de una grúa de CA de velocidad variable para el arranque, freno, giro, Marcha atrás, Cambio y protección de equipos como anclaje, Cabrestante de anclaje o combinación de anclaje.

Explanation of the model name of the control box

Outline installation dimension

Data table matching with control box

 

  1. Ambient temperature: -25 ° C - 45 ° C
  2. Tilt, swing: ± 22.5 degrees
  3. Withstand vibrations and shocks arising from the normal operation of the ship
  4. The impact of shock, vibration, salt fog, mould and moist air at sea in the normal operation of ships
  5. The anchor control box is divided into single-speed, double-speed, three-speed, two speed and three-speed control boxes according to the different motors controlled
  6. Use the master command controller.
  7. Box Protection Level IP 22, IP 44 o IP 56 según lo requiera el usuario
  8. The voltage of the AC power supply varies from + 6% -10% of the rated voltage; the frequency varies from ~
  9. Sites free of flammable, explosive and corrosive gases and sites free of different electrical dust and thunderstorms.

This series of control boxes are protective and are rated IP 22, IP 23, IP 44, and IP 56. The case housing is made of high-quality steel plate pressing welding, the box body is vertical, front door, according to different specifications, the single or double door. The electrical components are placed in the box and mounted directly on the rear bottom plate made of thick steel plates. The bottom plate and the upper and lower ends of the box are fixed by two fastening screws, and the upper and lower screws are released to remove the case for easy repair.

The bottom of the box is equipped with a wiring hole and wiring terminal row, and the inside of the door is equipped with a wiring electrical schematic diagram. When installing or overhauling, follow the schematic to connect the power and control cables to the corresponding symbolic positions in the terminal row. There are four mounting holes on the rear bottom plate of the case to secure the control box to the vertical wall.

Enquiry Form ( we will get back you as soon as possible )

Name:
*
Correo electrónico:
*
Message:

Verification:
0 + 9 = ?

Tal vez te gusta también

  • Sobre nosotros

    With over 13 years of experience; our company supply various motors, such as marine motors, motores especiales, and explore-proof motors…; service of inspection, storage and logistics; flexible payment term available; OEM service

  • EN CONTACTO CON NOSOTROS

    15F, Matriz A de Jinshan, Saidi Rd., Distrito de Yubei, Chongqing, China.

    Tel:+86-23-67304326
    Mob+86-15215103815
    Correo electrónico: manager@cqhisea.com
    Web:www.hiseamotor.com