Über uns| Kontaktieren Sie uns
EnglishDeutschРусскийEspañol
» Control System » Marine Control System » XMS91 Series Marine Anchor Windlass Control Box

XMS91 Serie Marine Anker Ankerwinde Steuerbox

Spannung: AC380/400/415/440/480/660V

Frequenz: 50Hz / 60Hz

Protection level: IP22/IP23/IP44/IP56

Ambient temperature: -25℃ ~45℃

  • Beschreibung
  • Main Parameter
  • Working conditions
  • Structure

Die Ankerwindensteuerbox der XMS91-Serie eignet sich zum Starten, Bremsen, Drehen oder Rückwärtsfahren, und Änderung der Geschwindigkeitsregelung verschiedener Arten von elektrischen Schiffsankerungen und Seilwinden AC-Motoren. Die Ankerwindensteuerbox der XMS91-Serie eignet sich für dreiphasige AC 50H in, 60Hz, 380V, 400V, 415V, 440V, 480V, und 660V. Es dient zur Steuerung des Drehstrom-Asynchronmotors eines Wechselstromkrans mit variabler Drehzahl für die Inbetriebnahme, Bremse, drehen, Rückwärts, Verschiebung und Schutz von Ausrüstungen wie Verankerungen, Verankerungswinde oder Verankerungskombination.

Explanation of the model name of the control box

Outline installation dimension

Data table matching with control box

 

  1. Ambient temperature: -25 ° C - 45 ° C
  2. Tilt, swing: ± 22.5 degrees
  3. Withstand vibrations and shocks arising from the normal operation of the ship
  4. The impact of shock, vibration, salt fog, mould and moist air at sea in the normal operation of ships
  5. The anchor control box is divided into single-speed, double-speed, three-speed, two speed and three-speed control boxes according to the different motors controlled
  6. Use the master command controller.
  7. Box Protection Level IP 22, Ip 44 oder IP 56 nach Bedarf des Benutzers
  8. The voltage of the AC power supply varies from + 6% -10% of the rated voltage; the frequency varies from ~
  9. Sites free of flammable, explosive and corrosive gases and sites free of different electrical dust and thunderstorms.

This series of control boxes are protective and are rated IP 22, Ip 23, Ip 44, and IP 56. The case housing is made of high-quality steel plate pressing welding, the box body is vertical, front door, according to different specifications, the single or double door. The electrical components are placed in the box and mounted directly on the rear bottom plate made of thick steel plates. The bottom plate and the upper and lower ends of the box are fixed by two fastening screws, and the upper and lower screws are released to remove the case for easy repair.

The bottom of the box is equipped with a wiring hole and wiring terminal row, and the inside of the door is equipped with a wiring electrical schematic diagram. When installing or overhauling, follow the schematic to connect the power and control cables to the corresponding symbolic positions in the terminal row. There are four mounting holes on the rear bottom plate of the case to secure the control box to the vertical wall.

Enquiry Form ( we will get back you as soon as possible )

Name:
*
E-Mail:
*
Message:

Verification:
4 + 9 = ?

Vielleicht möchten Sie auch

  • Über uns

    With over 13 years of experience; our company supply various motors, such as marine motors, Sondermotoren, and explore-proof motors…; service of inspection, storage and logistics; flexible payment term available; OEM service

  • KONTAKTIEREN SIE UNS

    15F, Jinshan-Matrix A, Saidi Rd., Distrikt Yubei, Chongqing, China.

    Tel:+86-23-67304326
    Mob+86-15215103815
    E-Mail: manager@cqhisea.com
    Web:www.hiseamotor.com