About Us| Contact Us
EnglishDeutschРусскийEspañol
» Control System » Marine Control System » BQC920 Series Marine Explosion-proof Magnetic Starter

BQC920 Series Marine Explosion-proof Magnetic Starter

Voltage: AC380/400/415/440/480/660V

Frequency: 50Hz / 60Hz

Protection level: IIP56

Rated current: 16~160A

  • Description
  • Features
  • Working conditions
  • Other

BQC920 series marine explosion-proof magnetic starter is suitable for the starting and operation control of AC motors of equipment in hazardous locations with explosive atmospheres such as natural gas vessels, chemical tankers, oil tankers, oil platforms, etc. BQC920 series marine explosion-proof magnetic starter complies with this standard according to GB3836.1-2010 “Explosive atmospheres Part 1: General requirements for equipment”, GB3836.2 “Explosive atmospheres Part 2: Equipment protected by explosion-proof enclosures “d” and related standards. GB3836.2 “Explosive Environment Part 2: Equipment protected by explosion-proof enclosure “d”” and related standards.

Voltage: AC380/400/415/440/480/660V

Frequency: 50Hz / 60Hz

Protection level: IIP56

Rated current: 16~160A

Combustible gas vapor class; ⅡA, ⅡB, ⅡC

Temperature group: T1-T4

Control box explosion-proof level: ExdⅡBT4

Ambient temperature: -25℃- 45℃

Ambient temperature: -25℃- 45℃

There are oil mist and salt spray in the humid air at sea

There are shocks and vibrations generated during normal operation of the ship.

Tilt, sway: ±22.5 degrees

Explosive gas environment hazardous places 1 zone, 2 zone

Combustible gas vapor class; ⅡA ⅡB

Temperature group: T1-T4

Control box explosion-proof level: ExdⅡBT4

Division of explosive atmospheric hazard areas

Different countries and regions, according to their own standards divide the explosive hazard area. China according to the frequency and duration of explosive gas mixtures, the explosive gas environment is divided into O, 1 and 2 zones. (with IEC Electrotechnical Commission *)

Zone 0: continuous occurrence or * occurrence of explosive gas mixtures in the environment.

Zone 1: An environment in which explosive gas mixtures may occur during normal operation.

Zone 2: An environment where explosive gas mixtures are unlikely to occur during normal operation or where explosive gas mixtures, if present, are only present for a short period of time.

Zone 0 generally exists only in sealed containers, storage tanks and other internal gas space, in the actual design process Zone 1 is rarely present, most cases belong to Zone 2.

  1. Explosion-proof electrical equipment is divided into two categories.

Class I electrical equipment for underground use in coal mines.

Class II electrical equipment used on occasions other than mines.

  1. Class II electrical equipment, according to its applicability to explosive gas mixtures with large test safety gaps or small ignition current ratio, divided into ⅡA, ⅡB, ⅡC three categories; and according to its surface temperature is divided into T1-T6 six groups.
  2. Explosive gas mixtures are grouped according to the ignition temperature.

 

Enquiry Form ( we will get back you as soon as possible )

Name:
*
Email:
*
Message:

Verification:
0 + 8 = ?

Maybe you like also

  • ABOUT US

    With over 13 years of experience; our company supply various motors, such as marine motors, special motors, and explore-proof motors…; service of inspection, storage and logistics; flexible payment term available; OEM service…

  • CONTACT US

    15F, Jinshan Matrix A, Saidi Rd., Yubei District, Chongqing, China.

    Tel:+86-23-67304326
    Mob:+86-15215103815
    Email: manager@cqhisea.com
    Web:www.hiseamotor.com